Antistatic polyurethane hose, super-light, microbe resistant, flame-resistant

        

• flexible hose/ ducting for gases and for abrasive dust, powder, fibres
• extraction unit, dedusting system, filter system, oil mist extraction
• extraction arm
• chemical industry: chemical vapours, vapour return hose at loading arm, paint steam, spray mist extraction
• explosion hazard area
• animal stall, animal shed: barn ventilation
• bus, utility vehicle, caravan/ trailer, mobile home/ camper/ RV, boat, ship/ vessel/ marine, yacht: ventilation, heating
• clean room ventilation, semiconductor production machine
• bellows, compensators

• super-light weight
• highly flexible + compressible 3:1
• abrasion-resistant
• microbe resistant
• good resistance to oil, gasoline and chemicals
• very good low temperature flexibility
• flame-retardant according to: UL94-HB
• flame-retardant according to: DIN 4102-B1
• Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to NFPA 652 10⁸-10⁹ Ω)
• in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: aspiration of combustible dust (zone 22 inside), for conveying of non-flammable liquids, for use in zone 1 and 2 (gases)
• conforms to the safety regulations of the German Wood Trade Association
• according to DIN 26057 Type 1
• conforms to RoHS guideline
• REACH according to --> Technology / Technical Information / REACH

• -40°C to 90°C
• short time to 125°C

• patented PROTAPE^® tape hose
• 1. spring steel wire integrated in wall
• 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR^®)
• 3. wall thickness 0,4 mm approx.

• further diameters and lengths available on request
• transparent (standard)
• special colours: partially coloured, completely coloured
• customer-specific branding
• ID 1,5''/ 38mm 12/305mm compressed packed in poly bag (low transportation cost / risk, minimum storage size), ID315 500mm not compressed

HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.

We supply genuine NORRES PROTAPE PUR 301 AS (XLD) hoses for flexible extraction and conveying applications.

NORRES PROTAPE PUR 301 AS (XLD) is a super-light, highly flexible and compressible antistatic polyurethane hose. It is designed for gases, abrasive dust, powder and fibres, with good abrasion resistance, microbe resistance and flame-retardant properties.

The hose is suitable for applications such as extraction units, dust collection systems, filter systems, oil mist extraction, extraction arms, ventilation systems and selected industrial conveying applications.

Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement.

FAQ

Q: What is NORRES PROTAPE PUR 301 AS (XLD) used for?

A: NORRES PROTAPE PUR 301 AS (XLD) is used for flexible extraction and conveying of gases, abrasive dust, powder and fibres. Typical applications include extraction units, dust collection systems, filter systems, oil mist extraction, extraction arms, ventilation systems and selected industrial conveying applications.

Q: Is PROTAPE PUR 301 AS (XLD) an antistatic hose?

A: Yes. This hose has a permanently antistatic polyurethane wall. According to NORRES technical data, its electrical and surface resistance is below 10⁹ Ω in accordance with ISO 8031.

Q: Is this hose suitable for dust extraction?

A: Yes. It is suitable for light-duty dust extraction and conveying applications involving abrasive dust, powder and fibres. Final hose selection should be based on the actual vacuum level, material type, hose diameter and operating condition.

Q: Can PROTAPE PUR 301 AS (XLD) be used in explosion hazard areas?

A: NORRES states that this hose is suitable for specified explosion hazard area applications in accordance with ATEX 2014/34/EU, German TRGS 727 and related requirements. Final suitability depends on the complete system design, grounding method, conveyed material, zone classification and actual operating conditions.

Q: What is the operating temperature range?

A: The standard operating temperature range is -40°C to +90°C. It can withstand temperatures up to +125°C for short periods, subject to actual application conditions.

Q: Is this hose suitable for heavy-duty conveying?

A: PROTAPE PUR 301 AS (XLD) is a super-light hose designed for light-duty flexible extraction and conveying. For heavier abrasion, larger material, stronger vacuum or continuous heavy-duty operation, a heavier NORRES hose model may be more suitable.

Q: Is this hose flame-retardant?

A: Yes. NORRES states that PROTAPE PUR 301 AS (XLD) is flame-retardant according to UL94-HB and DIN 4102-B1.

Q: How can I choose the correct NORRES hose size?

A: Please provide the required inner diameter, conveyed material, operating temperature, airflow or vacuum condition, installation length, quantity and delivery location. Our team will assist in recommending a suitable NORRES hose model.