HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
Edge Banding Machine (HH-509R)
| Previous | 7 / 10 | Next |
HH-509R Edge Banding Machine – Straight & Inclined (Bevel) Edge Full Process Demo
- edge banding machine
- panel furniture edge bander
- straight and bevel edge bander
- 45 degree edge banding machine
- 90 degree edge banding machine
Functions
Features
.jpg)
Inclined Edge Milling
The milling cutter mills the edge of the panel into a inclined edge,
Adjustable tilt angle,
The hypotenuse is formed at a time.
.jpg)
Straight Edge Milling
Configure two 2.2KW motors,
It consists of two milling cutters before and after,
Maximum pre-milling height 40mm (optional 65mm),
Corrugation and expansion edge of milled panel surface,
Make the edge band and the panel fit more closely,
Integrity and aesthetics are better.
Inclined Edge Guling
Melt the glue after high temperature
Coated on the inclined side of the panel,
Perfectly fit the shape of the hypotenuse,
Even glue application guarantees the fit effect.
Tape grooving
According to the preset angle,
Bend the tape,
Facilitate the subsequent welt process
tape can better fit the panel
.jpg)
Straight Edge Guling
Melt the glue after high temperature
Apply to the straight side of the panel
Even glue application guarantees the fit effect.
.jpg)
Straight Edge pressing
Tape bonded to the panel
Pressurized by 4 straight pressing wheels,
Make the panel and tape fit more firmly
Inclined Edge pressing
Pressing through 4 oblique pressing wheels and 2 straight pressing wheels,
Make the panel and tape more firmly.
.jpg)
Inclined Edge Rough Trimming
Automatic disc tracking
High-frequency high-speed motor structure,
Trimming the tape bonded to the oblique edges of the panel,
Repair the excess tape,
Make it milled into an edge with R arc.
.jpg)
End Cutting
Through precise linear guide motion,
Adopting automatic tracking of the master and high-speed high-speed motor cutting structure,
Edge band protruding from the front of the panel
Trimming with the edge bands protruding from the back of the panel,
Make it flush with the front and back of the panel,
Ensure that the cut surface is smooth
.jpg)
Straight Edge Fine Trimming
Adopt large and small disc automatic tracking
High-frequency high-speed motor structure,
Trimming the edge bands with straight edges bonded,
Repair and process the excess edge banding material on the upper and lower edges of the panel
Make it milled into an edge with R arc.
Corner Rounding
Adopt profile wheel rounding device for left and right movable profile,
Mill the four corners of the edge banding strip bonded to the panel into an R arc shape,
Make the 4 corners of the panel more smooth and beautiful.
R1 and R2 Scrapping
Scrapping knife on both sides of the panel
Scrape the wavy knife marks on the tape due to rotation,
The modified R angle is the same size as the refined R angle,
Make the upper and lower parts of the panel more smooth and neat.
Flat Scraping
Remove the remaining glue extruded from the joints of the upper and lower planes of the edge banding on the panel, so that it is not easy to stick to the buffing wheel and reduce the frequency of buffing wheel replacement
Front Release Agent and Rear Cleaning Agent
The release part sprays the release agent on the plane ,
Prevent excess glue from splashing on the panel surface and causing difficulty in cleaning;
The cleaning part sprays the cleaning agent on the plane,
Make cleaning up easier.
Option Flexible Flat Scraping
Remove the remaining glue more easy and convenience
Technical Specifications
Applications
Automatic edge banding machine, meet various edge banding needs, the necessary machine for furniture, saving time, labor cost.**Applications**
Service Coverage
Features
Inclined Edge Milling
The milling cutter mills the edge of the panel into a inclined edge,
Adjustable tilt angle,
The hypotenuse is formed at a time.
Straight Edge Milling
Configure two 2.2KW motors,
It consists of two milling cutters before and after,
Maximum pre-milling height 40mm (optional 65mm),
Corrugation and expansion edge of milled panel surface,
Make the edge band and the panel fit more closely,
Integrity and aesthetics are better.
Inclined Edge Guling
Melt the glue after high temperature
Coated on the inclined side of the panel,
Perfectly fit the shape of the hypotenuse,
Even glue application guarantees the fit effect.
Tape grooving
According to the preset angle,
Bend the tape,
Facilitate the subsequent welt process
tape can better fit the panel
Straight Edge Guling
Melt the glue after high temperature
Apply to the straight side of the panel
Even glue application guarantees the fit effect.
Straight Edge pressing
Tape bonded to the panel
Pressurized by 4 straight pressing wheels,
Make the panel and tape fit more firmly
Inclined Edge pressing
Pressing through 4 oblique pressing wheels and 2 straight pressing wheels,
Make the panel and tape more firmly.
Inclined Edge Rough Trimming
Automatic disc tracking
High-frequency high-speed motor structure,
Trimming the tape bonded to the oblique edges of the panel,
Repair the excess tape,
Make it milled into an edge with R arc.
End Cutting
Through precise linear guide motion,
Adopting automatic tracking of the master and high-speed high-speed motor cutting structure,
Edge band protruding from the front of the panel
Trimming with the edge bands protruding from the back of the panel,
Make it flush with the front and back of the panel,
Ensure that the cut surface is smooth
Straight Edge Fine Trimming
Adopt large and small disc automatic tracking
High-frequency high-speed motor structure,
Trimming the edge bands with straight edges bonded,
Repair and process the excess edge banding material on the upper and lower edges of the panel
Make it milled into an edge with R arc.
Corner Rounding
Adopt profile wheel rounding device for left and right movable profile,
Mill the four corners of the edge banding strip bonded to the panel into an R arc shape,
Make the 4 corners of the panel more smooth and beautiful.
R1 and R2 Scrapping
Scrapping knife on both sides of the panel
Scrape the wavy knife marks on the tape due to rotation,
The modified R angle is the same size as the refined R angle,
Make the upper and lower parts of the panel more smooth and neat.
Flat Scraping
Remove the remaining glue extruded from the joints of the upper and lower planes of the edge banding on the panel, so that it is not easy to stick to the buffing wheel and reduce the frequency of buffing wheel replacement
Front Release Agent and Rear Cleaning Agent
The release part sprays the release agent on the plane ,
Prevent excess glue from splashing on the panel surface and causing difficulty in cleaning;
The cleaning part sprays the cleaning agent on the plane,
Make cleaning up easier.
Option Flexible Flat Scraping
Remove the remaining glue more easy and convenience
Technical Specifications
| Min. Panel length&width | ≥160mm |
| Inclined panel thickness | 15-25mm |
| Straight panel thickness | 10-60mm |
| Straight Tape thickness | 0.4-3.0mm |
| Inclined tap thickness | 0.4-1.5mm |
| Weight | 4100kg |
| Inclined degree | 45 degree(unadjustable) |
| Inclined feed speed | 15m/min |
| Straight feed speed | 18m/min |
| Total power | 31.3kw |
| Working pressure | 0.65mpa |
| Overall size | 9300*900*1600mm |
Applications
Automatic edge banding machine, meet various edge banding needs, the necessary machine for furniture, saving time, labor cost.**Applications**
- Straight and bevel edge banding for panel furniture
- 90-degree and 45-degree edge banding processes
- Cabinet and wardrobe manufacturing
- Finishing of wood-based panels with straight and inclined edges
Service Coverage
We focus on supplying woodworking machinery to local customers.
Installation, machine setup, operator training, and after-sales technical support are provided by our local service team.
Remote technical assistance is available when required.
FAQ
Q: What is this machine used for?
A: It is used for straight and bevel edge banding on wood-based panels in furniture manufacturing.
Q: Is this machine suitable for furniture factories?
A: Yes. It is suitable for cabinet, wardrobe, and panel furniture production.
Q: Do you provide installation and training?
A: Yes. Installation, machine setup, and operator training are provided by our local technical team.
Q: Do you offer after-sales technical support?
A: Yes. Ongoing after-sales service and technical support are provided.