• Drilling on six sides of the workpiece at one time, and grooving on the front and back sides.
• Multi-shift production possible, easy to learn，The production efficiency can reach 3.2-3.8pieces/min. 8 hours capacity up to 385 cubic meters（Expand structure）-455 cubic meters（Expand structure）.
• Single machine minimum board support 35mmX70mm, can be produced as a whole.
• The feeding and discharging table is full of air flotation holes, which can effectively protect the work from being damaged during the sliding process.
• The purchase of long guide rails for the Y axis ensures maximum processing efficiency, Double gripper and automatic side abutting device ensure the stability of the workpiece during the movement.
• Open docking interface, compatible with xml, BAN, mpr and other formats, seamless docking with the design and dismantling software, no programming is required, and the barcode can bescanned.

2.Product Features

• Imported gantry milling processing on the overall frame effectively guarantees the stability and accuracy of the frame structure.
• The frame is annealed to eliminate stress and increase the stability of the frame (guaranteed 10-year service life of the frame).

• Has the national exclusive patent - three-speed intelligent lifting gripper.
• It is convenient to load the board (When feeding, the gripper is 0.2-0.3mm lower than the table top).
• Avoid scratches on the board (The gripper is 0.1mm higher than the table during empty running).
• The accuracy of the horizontal hole of the small plate (the gripper is flat on the table during processing).
• Accurately grasp the hole position, with dust removal function. Adaptive gripper change function (reduce the number of grippers).

• Exclusive customized row drill package.
• Integrated drill pack (built-in auxiliary pressure roller).
• The use efficiency of double-row drills reaches 90%, and the production efficiency is increased by 30%-45%.
• The minimum vertical hole processing distance is 60mm.
• The minimum vertical horizontal hole processing distance is 128mm.
• The minimum horizontal hole processing distance in the horizontal direction is 210mm.

• Customized 3D Home System.
• Exclusive dynamic acceleration algorithm.
• Slotting Adaptive Speed ​​Algorithm.
• Algorithm for dynamic positioning of special-shaped plates.
• Minimum tool lift machining path algorithm.
• The tool slot can adjust the offset at will.

3. Product technical parameters

Six Sided Drilling Machine Configuration Table
NO	Matter	Details		Illustrate	Remark
1	Basic information	Basic information	Device model	T-E9F FOUR BORING HEAD DUAL CHANNEL DUAL STATION
2	Processing range	Processing plate size range:	Length range	70MM-2750MM
			Width range (left channel)	35MM-650MM
			Width range (right channel)	35MM-650MM
			Thickness range	12-50MM
		Processing type	Processing hole type: see process details	Cutter
			Door reaming processing method (whether independent drilling group)	Upper drilling package	Integrated in the upper drill package
			Special-shaped plate (whether it can be processed)	Can be processed
			Six-sided drill gripper (fixed or not)	Smart three-level function	Homemade (patented)
3	Device Configuration	Drill package parameters	Drill package quantity	Upper drilling package X2 Lower drilling package X2
			(Single) Quantity of drill bits on the upper drilling package	12 vertical drills, 8 horizontal drills, 12 auxiliary cylinders
			(Single) Quantity of drill bits on the lower drilling package	6 vertical drills, 2 auxiliary cylinders
			Auxiliary pressure plate quantity of drill package	12 built-in drill packages are integrated as a whole
			Quantity of upper spindles	3.5KW spindle X2 sets
			Quantity of lower spindles	3.5KW spindle X2 sets
		Basic parameters	Program docking (file format)	MPR/XML/DXF/BAN
			Usage mode (automatic connection usage)	Can be used alone or online
			Scan Mode (Scan Method)	QR code scanning
			Total equipment power	About 33KW
			Working pressure	0.8Mpa/m2
			Equipment net weight	About 5000KG
		Travel of each axis & maximum positioning speed & power	X1 axis	130M/min/0.75KW
			Y1 axis	80M/min/1.5KW
			Z1 axis	50M/min/2KW
			U1 axis	130M/min/0.75KW
			V1 axis	80M/min/0.75KW
			W1 axis	50M/min/0.75KW
			A axis	80M/min/0.75KW
			Z2 axis	50M/min/0.75KW
			Y2 axis	80M/min/1.5KW
			X2 axis	130M/min/0.75KW
			U2 axis	130M/min/0.75KW
			V2 axis	80M/min/0.75KW
			W2 axis	50M/min/0.75KW
		Equipment size	Long	4300MM
			Width	3400MM
			High	2200MM

Main equipment and its advantages

The main production equipment

	Device name	Equipment brand	Quantity
The main production equipment	High-precision automatic pentahedron gantry machining center	Imported from Taiwan AWEA	5
	High Precision Vertical CNC Machining Center	CARLOS	6
	Welding Robot	JAPAN OTC	8
	Laser Fiber Metal Cutting Machine	BAI SHEN	2
	Laser Interferometer	U.K. RENISHAW	2
	Ballbar	U.K. RENISHAW	2
	Vibration Aging Meter	SHENHUA	2
	BBending machine		4
	Sawing machines, milling machines, punching machines, etc.

Equipment advantage

CNC products are processed through cutting, welding, machining, painting and other processes of raw materials such as steel, square tubes, and aluminum, and then assembled with other finished assemblies to produce CNC six-sided drills, which belong to other engineering machinery manufacturing industries. General equipment manufacturing industry.
 
     From the purchase of raw materials into storage, the square tubes of raw materials are cold drawn through high-precision welding robots/water platform to weld the frame frame, the aging vibrometer is used to eliminate stress, and the frame is put into the five-axis machining center for drilling and tapping processing, using Vertical milling machine horizontal platform, beam, corbel and other precision machining parts, and then into the painting, assembly, testing, inspection packaging, storage.




Brazil, Brasilia