HUPLONG INDUSTRIES (M) SDN BHD
No 2-48, Jalan Perniagaan 2, Taman Pusat Perniagaan, Kampung Tengah Sungai Abong, 84000 Muar, Johor, Malaysia.
+606-9522968
24B, Jalan PSK 3,
Pusat Perdagangan Seri
Kembangan, 43300
Seri Kembangan,
Selangor, Malaysia.
+6016-3411889
NORRES CONNECT 683 每 Seal for Assembly of Adapter Bodies
| Previous | 4 / 15 | Next |
- Wastewater Aeration System Accessory
- NORRES CONNECT 683 Malaysia
- EPDM Adapter Body Seal
- Membrane Tube Diffuser Seal
- Adapter Body Assembly Seal
Product details
APPLICATION
- membrane tube diffusor, for industrial and municipal wastewater treatment plant, pressure diffusion with fine bubbles, oxygen input for nitrication in activation basins, permanent and intermittend ventilation
- oxygen input and circulation in xed-bed and bioreactors, thorough mixing of activation basins, sand trap louvre ventilation, renaturation of lakes and rivers, aquacultures, sh farming
PROPERTIES
- conforms to RoHS guideline
DESIGN
- wall: EPDM
HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES CONNECT 683 seals for the assembly of adapter bodies used with membrane tube diffuser installations in industrial and municipal wastewater treatment systems.
NORRES CONNECT 683 is a seal for assembly of adapter bodies. The official design specifies an EPDM wall material. NORRES currently lists two variants with inside diameters of 38.5 mm and 44.0 mm. Both variants have an outer diameter of 65.00 mm and an approximate wall thickness of 3.00 mm.
NORRES officially lists CONNECT 683 for membrane tube diffuser applications including pressure diffusion with fine bubbles, oxygen input for nitrification in activation basins, permanent and intermittent ventilation, fixed-bed and bioreactors, activation basin mixing, sand trap louvre ventilation, lake and river renaturation, aquaculture and fish farming.
NORRES states that CONNECT 683 conforms to the RoHS guideline.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement. For CONNECT 683, selection should additionally confirm the compatible adapter body diameter, the required seal inside diameter, the diffuser installation arrangement and the total installation quantity.
FAQ
Q: What is NORRES CONNECT 683?
A: NORRES CONNECT 683 is a seal for the assembly of adapter bodies used in membrane tube diffuser systems.
Q: Is CONNECT 683 a membrane tube diffuser?
A: No. CONNECT 683 is an accessory seal used as part of an adapter body assembly. It is not the diffuser membrane itself.
Q: What is the official material of CONNECT 683?
A: NORRES specifies an EPDM wall material for CONNECT 683.
Q: Which CONNECT 683 sizes are currently listed?
A: NORRES currently lists an inside diameter of 38.5 mm and an inside diameter of 44.0 mm. Both variants have an outer diameter of 65.00 mm and a wall thickness of approximately 3.00 mm.
Q: What are the current official order numbers?
A: NORRES lists 683-0040-2760 for the 38.5 mm I.D. version and 683-0045-2760 for the 44.0 mm I.D. version.
Q: What applications are officially listed for CONNECT 683?
A: NORRES lists membrane tube diffuser systems for industrial and municipal wastewater treatment, fine-bubble pressure diffusion, oxygen input in activation basins, fixed-bed and bioreactors, lake and river renaturation, aquaculture and fish farming.
Q: Does CONNECT 683 conform to RoHS requirements?
A: Yes. NORRES states that CONNECT 683 conforms to the RoHS guideline.
Q: How should the correct CONNECT 683 seal be selected?
A: Selection should confirm the compatible adapter body, the required seal inside diameter, the membrane tube diffuser installation arrangement and the required quantity. The 38.5 mm and 44.0 mm I.D. versions must not be treated as interchangeable without checking the matching adapter body.