HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.

HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES CP PVC 466 HT hoses for customers throughout Malaysia requiring a PVC clamp profile hose for flexible ducting of gases, dust, powder and fibres, including welding fume extraction and extraction-arm applications.

NORRES CP PVC 466 HT is a PVC clamp profile hose (clip hose) designed for operating temperatures up to +120°C for short periods. Its official CP construction uses a galvanised steel clamp-profile supporting spiral, together with a fabric-reinforced tape made from PVC-coated glass fabric.

NORRES officially lists this hose as fabric reinforced, highly flexible and compressible. The external clamp profile provides abrasion protection, while the hose wall is securely clamped within the profile. Official properties also include very good heat resistance, good resistance to alkalis and acids, good resistance to chemicals, and a flame-retardant wall according to NF P 92-503 M1.

The standard hose colour is grey. NORRES also lists further diameters and lengths on request, as well as optional stainless steel (INOX) clamp profile and double-layer versions.

Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement. The permitted pressure, vacuum and bending-radius values vary by hose size and must be checked against the official technical table before use.

FAQ

Q: What is NORRES CP PVC 466 HT?
A: NORRES CP PVC 466 HT is a PVC clamp profile hose, also described as a clip hose, for flexible ducting applications involving gases, dust, powder and fibres.

Q: What applications are officially listed for this hose?
A: NORRES officially lists flexible ducting for gases, dust, powder and fibres, welding fume extraction and extraction-arm applications.

Q: What is the operating temperature range?
A: The official NORRES temperature range is -10°C to 110°C, with short-time use up to 120°C.

Q: Is CP PVC 466 HT flame-retardant?
A: Yes. NORRES specifies a flame-retardant wall according to NF P 92-503 M1.

Q: What is the hose construction?
A: NORRES specifies a CP construction with a galvanised steel clamp-profile supporting spiral and fabric-reinforced PVC-coated glass fabric tape.

Q: Is this hose flexible and compressible?
A: Yes. NORRES officially lists CP PVC 466 HT as highly flexible and compressible.

Q: Is CP PVC 466 HT resistant to chemicals?
A: NORRES lists good resistance to alkalis and acids, as well as good resistance to chemicals. Final suitability must still be checked against the actual chemical, concentration, temperature and exposure duration.

Q: Can CP PVC 466 HT be used for pressure or vacuum applications?
A: NORRES provides size-specific recommended threshold values for overpressure and underpressure. The permitted values vary by hose diameter and must be checked against the official technical table before selection.

Q: Is CP PVC 466 HT antistatic, electrically conductive or ATEX approved?
A: The official NORRES product page and datasheet do not state a specific antistatic rating, electrical conductivity rating or ATEX approval for CP PVC 466 HT. These requirements must be separately verified before selection.